[Hardware] Mechanics -

Cyclop Pi Camera adapter

Sinkha — Sun, 14 Jul 2024 01:40:44 +0000

hi, after hours and hours of research I couldn't find the link to download the adapter to mount the pi camera instead of the logitech c270 on a cyclop converted to fabscan pi, would someone be kind enough to provide me with the link or the file directly , Thank you very much

Scanning Capabilities.

Kendrick — Wed, 24 May 2023 14:10:45 +0000

Is it possible to scan bowl shaped objects inside and out? for example a hard hat has internal features to latch ear muffs and the straps to the helmet. are those kinds of features captured? also is it dimensionally correct so that it could be scaled and imported properly in to freecad?

Which 400-step motor to choose

Sraasch — Fri, 13 Jan 2023 21:17:46 +0000

My fabscan-pi kit came with a 200 step motor (17HS8401). I'd like to upgrade to a 400-step motor, but don't know what to choose... There apparently is a 17HM8401 that looks promising, but I want to be sure that I don't go down the path of needing other new hardware or changes to the existing setup.

Can one of you generous souls give me a bit of advice?

Thanks.

aitsolutions

aitsolutions — Sat, 22 Oct 2022 18:35:53 +0000

aitsolutions

Resizing Case Angle

Danilo0702 — Sat, 22 May 2021 16:18:40 +0000

here just a sheet where you can specify the size proportionally without changing the angle of the laser. It's just a vector drawing in which you set your dimensions. Only change "jpg" to "svg"

545

New file Fabscan-Case for CNC

Danilo0702 — Sat, 22 May 2021 10:52:30 +0000

Here is a .svg file for the CNC. Each component is now individual. Only the change from ".jpg" to svg

544

542

Stepper motor mounting plate

tobi42 — Thu, 13 May 2021 21:22:56 +0000

Sorry,

this might seem obvious for some of you, but where can I find this mounting plate for the stepper...

https://www.anoniem.org/?https://youtu.be/W9KgYL7sZN0?t=242

I tried to make one myself, but it's far from stable...

https://ibb.co/8bvyrVX

Painting black inside my fabscan

Micha_AC — Thu, 13 May 2021 00:18:25 +0000

Is it a good idea to paint all walls black on the inside except a 1cm area around the laserprojection?
What do I need to care for?

Range of the scanner?

Santiago — Tue, 09 Mar 2021 16:49:25 +0000

Hello, everyone. I'm interested in Fabscan for a prototype, but before even thinking of buying it, I need to know what's the scanning range of the device... The prototipe has to measure the diameter and thickness of a pipe using a scanner, and the pipes have around 1 to 2 meters of diameter (it's a real scale experiment)... The pipe length is neglected, since for that dimension I'll use a different device.

Long story short: I need to know the minimum range, and maximum range of the scanner for that purpose.

driver setup

mik3d — Tue, 24 Nov 2020 12:52:01 +0000

i scanned a 70mmx70mm cube and it scanned as a 8 point star. I ordered the kit from wetterott it came with a 200 step motor and TMC2209 DRIVER. I read the Forms, F.A.Q.s and found nothing that fits the problem. It talks about a different DRIVER. The explanations are not to the point. I am using software version 0.9.4, 2-lasers, settings in config file------process# 5,TURNTABLE---steps 3200(only one I changed), radius 70, height 155. The calibration is good. I would appreciate any help with resolving this.