Notifications
Clear all

Scanning Issues

12 Posts
3 Users
1 Likes
3,179 Views
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

Hi, I am having a few issue with the Fabscan, since the new software upgrade the scanner wont operate properly, I have tried a fresh SD card with the software on, done a calibration with the official card and holder, this seems to work but I have noticed when it goes through the process there is no mention that the calibration is succesfull, I can only assume it has as there is no warning that flash up, once it looks like calibration is over I can check the new setting area, this confirms the camera, led's, laser and turntable are all functional, once confirmed I adjust settings, the colour box is unticked, resolution slider 25%, saturation, contrast, and brightness  50%, when the scanning starts its usually 15 mins foa scan but at the end when I check there is nothing showing, when scanning is in progress nothing comes on the screen,  can anyone help? 

Reply
11 Replies
rene
 rene
Admin
(@rene)
Joined: 5 years ago

Active Member
Posts: 14

Did the scanner work with the previous software version?

Reply
Philiom
(@philiom)
Joined: 5 years ago

Active Member
Posts: 8

Yes, but the scans were not great but better than with the new software.

How critical is the position of the test card in height as the top is just out of view on the screen, I lowered it today but it would not even calibrate, seemed to stop at 9 min for half an hour.

 

Reply
mario
Admin
(@mario)
Joined: 5 years ago

Honorable Member
Posts: 570

Could you please post some pictures of your setup. An maybe call 

 https://<your_fabscan_ip_address>/api/v1/log/download/ 

in your browser and attach the automatically downloaded zip file here. 

Reply
mario
Admin
(@mario)
Joined: 5 years ago

Honorable Member
Posts: 570

Just moved this topic to here. 

Reply
Philiom
(@philiom)
Joined: 5 years ago

Active Member
Posts: 8

To Mario, I cant find where to add the pictures and downloaded zip file, can you help?

Reply
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

To Mario, thanks for the info, away for a few days so will check your comments on my return

Reply
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

I sent previous message about not being able to find where to attach, when I sent it the "Leave a Reply" box now has the facitlity to Attach??? Wierd, It definately was not there before!

Reply
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

Heres thje 1st Scan, 2nd one to follow

Reply
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

1st Scan

Reply
Philiom
Posts: 8
Topic starter
(@philiom)
Active Member
Joined: 5 years ago

2nd Scan , I have tried https://192.168. ./api/v1/log/downLoad/

But I just get 404

Reply
mario
Posts: 570
Admin
(@mario)
Honorable Member
Joined: 5 years ago

Did you perform the scan with an open lid? Or was the lid closed during the scan? When the lid was closed, I thing your problem is calibration related.

Reply
Share: