Mirrored Scan  

  RSS
willie42
(@willie42)
New Member

Hi everybody,

0.7 did not work for me, so I decided to go back to 0.5 which did the job previously.

I installed the older image. Everything seems to work that far (boots stable, the server starts, connects to wifi etc.) and calibration finishes.
But when I do a scan things seem to be mirrored. What am I doing wrong?

The only thing that is a bit special with my setup is, that the cam ist installed upside down and I fliped the image (h+v) within the config so that the preview is as supposed to be.

A Scrrenshot  ... will be removed the next days ...

https://jagdhaus.selfhost.de/owncloud/index.php/s/FLQ2iB3nRkgHHm9

Regards, Willie

 

 

Quote
Posted : 22/07/2019 11:24 am
mario
(@mario)
Member Admin

Have you proved the issues in the F.A.Q.  ( "My scan looks doubled")

https://fabscanpi-server.readthedocs.io/en/latest/faq/#scanning-issues

I think this will fix your issue... 

ReplyQuote
Posted : 22/07/2019 11:44 am
Danilo0702
(@danilo0702)
Trusted Member

I have been working with the scanner every day since February --- the scan is flawless, only the mesh processing is faulty.
I take the image data and process it externally in another software. The result is very good. I hope the two lasers are still red in 5W

ReplyQuote
Posted : 22/07/2019 11:24 pm
mario liked
willie42
(@willie42)
New Member

@mario

Thanks!

I only found the empty FAQ here in the forum. But of course there is more to read - sorry.
And, also my blame: For sure I had the same issue a year ago, but obviously forgot about it - I´m geting old 🙁

Willie

ReplyQuote
Posted : 23/07/2019 2:49 pm
Share: