@k4rlchen meanwhile i could measure the pin (data out on the chip), there are permanent 0,14V (no matter if the ring-light is turned on or not).I al...

There comes no signal out on the ring-light-connector....Not on pressing light on and not on calibrating or scanning...... :(

@mario Hello Mario :) Do you have any solution for this?????

I had some exercise with Corona. But there is no solution yet. I have no fine Tools to measure the Chip, so i had buy me a new Ringlicht, but this...

Thanks for the Reply! :)I meanwhile get an new FabScanHat from Waterott, because my building-charge have no right boot-loaders.They delivered me a new...

@mario Yes, thats it.Meanwhile the Motors runs correct. The Lasers also.But the LED´s don`t work. So the Calibration won`t work too.I think the Data...

Hello, should there all three soldered, like this????

Use an Mini-Gimbal for Pan and Tilt, like this: I think you got more Problems with the Object to scan, when you rotate this. Have you already ...

Hello Mario, thanks for your Help :)I`m testing the Hardware-Configuration of CebScan, because they use an up- and downlifting Cam, where you have an ...

Hello and thanks for the fast Reply :) The Motor-Drivers are full-A4988-compatible Step-Sticks. (both are optical similar and from Amazon, see pictu...

Ihave test it also with an Raspberry 3 B, B+ and Zero W (The picture and the Logs is from the Zero W, but the Logs and the errors are all the same at ...

Hello :)The solder joint are all measured with Multimeter and have contact.I have test three different 12v Power- Supplies (1A, 1,5A 3A) with two diff...

I have ordered me new Steppers (Nema 17 12V 0,4A 3200Stepps) with Drivers, but they also show no function on the FabSac-Hat... Have anybody an idea?...

When I go on the Web-Server, this comes in the Log: 2020-02-15 12:12:46,109 - fabscan.server.services.websocket.FSWebSocketHandler - DEBUG - New cli...

All same Time in English: I apparently had the same problems as others here and had to re-flash the firmware due to connection problems. Has ever...