Please note i do not have a legal license of solidworks. I'm using a combination of design software. OpenSCAD, FreeCAD and TurboCAD (is autocad compatible) i have a legal license. mainly that means th...

Most interesting! if you want to scan at 0.3 - 0.4mm accuracy that'll work ok. To me interesting is a build where the scanner that is as accurate as the human eye can see - so 0.01 - 0.02mm we spea...

Yes much appreciated effort. The design seems little bit overcomplex to me. Now of course i have some experience designing machines. Fixed positions for lasers - so to speak also 2 lasers might be pos...

thinking about this plan - it might require more than 2 lasers in total such setup. 2 that are low in the case and 2 that are quite a tad higher. one wouldn't want to move the lasers i guess as those ...

If i put the lightning of fabscan with the camera on some cheap SBR16 rails with 4 carriages, which i have left here (actually shortest i have are 400mm length) then would the camera also photograph t...

Yes hello! What would be needed for adding a nema34 for rotary board and build tad larger rotary board? i have some options here to run a nema34. yet what would be simplest to work in fabscan soft...