I have a question concerning the board. On the board there is written that there is the possibility to build a servo driven system for the laser. So is there a plan to implement that feature that also...

So thanks a lot for the help. Now it works, but it wasn´t one problem alone. So first of all i checked all solder joints. They were good, so i decided to test other things. The next thing ich checked ...

Hey guys, Its been a while, but i did not get to manage this thing. I couldn`t get a callibration for the scanner. The scanner hangs up after the first rotation to the side and it shows the window ''t...

Hello Mario, thanks for the new wiring diagramm. I followed you instructions with this. I`ve bought a Watterot Set one year ago. I have an 17HM3410 nr 20170821 motor and the problem is that the callib...

So I bought the same set from Watterrot with the same motor, so i decided to follow your instructions, and cable the board as you showed on the picture. The problem is now, that the callibration did n...

There wen something wrong with the picture so here is it again:

Hello, I get no good results after a few recallibration. The Fabscan shows that the callibration worked and i`ve followed the instructions of AndreaCH,in the other discussion about callibration, but m...

Yeah, the Problem was that after calibration the whole Pi did not react anymore and if I wanted to reload the Online User Interface it sayd that the User Interface isn´t working and after that it show...

Hey guys, I bougt a Fabscan Pi at the beginning of 2018, but i didn´t get it to work. Today i updatet to the newest version, v.0.7.0. That worked, I saw the UI, but when I want to calibrate the Fabsca...