This user account status is Approved

Forum Replies Created

Das 3d-Scanner-praxisbuch

Hi Before I start trawling is "Das 3d-Scanner-praxisbuch" available in English? or in a format that can be translated? my German is awful I'm afraid and it looks like it could be really useful. Cheers

In forum [Software/Hardware] Development

9 months ago
RE: "keep_raw_images": Where are the raw images saved

Hi I had the same issue, you need to use an SFTP, either WinSCP or Filezilla work, and they are under /home/pi/scans/ in folders. See this post (in german)

In forum [Software] FabScanPi Server

9 months ago
RE: Assembly Video - Replacement Parts, Changes, ...

@mario Just to let you know that i got a 200 step motor with mine (feb 2021) in the kit from Watterott not a 400, Also the steps in the latest download default.config.json was set to 6400.

In forum [Hardware] Electronics

10 months ago
RE: Download images via PuTTy

Thanks, I will give WinSCP a try.

In forum [Software] FabScanPi Server

10 months ago
Download images via PuTTy

Hi all I'm trying to download my scan via PuTTy as the download option on Fabscan.local tends to time out the UI in Firefox, or the scan doesn't show up and is a little hit and miss, I haven't managed...

In forum [Software] FabScanPi Server

10 months ago
RE: First callibration freeze, network loss and scan fail

Hi Thank you that worked.

In forum [Software] FabScanPi Server

10 months ago
First callibration freeze, network loss and scan fail

Hi Little confused as to what to do. I have just built and set up my Fabscan and gone to do the first calibration. The FabScan is connected to a laptop via LAN (Wifi not available at the moment) I ca...

In forum [Software] FabScanPi Server

10 months ago
RE: FabScan kit build help

@mario Thanks for that will have a watch of the video and check out the wiring info. Posted by: @powerlines2000 2. If I use the supplied spacers when installing the Pi3 it lifts the Pi slightly abo...

In forum [Hardware] Electronics

10 months ago
FabScan kit build help

Hi all I just got my FabScan kit from Watterott and have been building it following the "FabScan Pi Open source DIY 3D Scanner: Assembly" video, but it is from 2016 and things seem to have changed a b...

In forum [Hardware] Electronics

10 months ago