Tried that method Pi and hat separated, pi powered with pi power supply , hat powered with jumpers from the pi Still no go, the same errors consecutively... however a pi undervolt condition warning ...

@mario Haha I see The other question would be The resistor values Are they 2k and 5k Or are they 2.2k and 5.6k The 2k2 and 5k6 in series, there's nothing special or anything just those two valu...

Looking at that compared to the one listed currently using a pi You got more wires, and different locations.... I kinda wonder if something is missing from the current directions for using a pi ...

@mario the link on the post is wget I had to change it to githubs proper pathway (master doesn't exist anymore) (I just opened GitHub with explorer and followed the path changing what didn't ma...

@mario The issue being from Canada is custom fees and issues with shipping, I have a second hat i can try as well it didn't work on first boot either I figured out to cd /etc to edit the proper con...

*heres a clip of the logfile after editing the proper file pi@fabscanpi:~ $ sudo /etc/init.d/fabscanpi-server stop fabscanpi-server stopped.pi@fabscanpi:~ $ sudo avrdude -c pi_isp -p m328p -e -U flash...

I have figured out that I needed to be in the folder /etc to edit the proper .Conf file, I still however get an error of unable to start avr rc=1 Once I get a chance I will add clips from the log file...

JustinB Mario i have the same issue with this hat 2 of them actually i suspect watterott is NOT FLASHING THE BOOTLOADER so i have followed same steps and got to the flashing the bootloader after cha...

@mcinerney Just curious if you ever got an answer I've followed the directions and can obtain the bootloader hex, but when I run the next command to flash the boot loader it says pi_spi does not exist...