moop
moop
@moop
Active Member
Joined: Mar 5, 2020
Last seen: Aug 25, 2020
Topics: 3 / Replies: 11
Reply
RE: Calibration sheet query

@cyberplod For the calibration sheet, the rows and columns are the intersections (I had the same problem as I counted squares and got 9x7 which doesn'...

4 years ago
Reply
RE: How to modify the Fabscanpi software

@mario My main intrest is adding an option to do a partial scan (x-deg rather than 360-deg) Is there a chance you could implement that in the new fron...

4 years ago
Reply
RE: Bootloader Flashing Tool.

The following might help to clarify a few things: Marios photos above serve to illustrate the connections to the PI-HAT for FLASHING the bootloader....

4 years ago
Reply
RE: funny looking scannings result

what direction is the turntable rotating durring the scan? Should be CW. If CCW, you might have the stepper motor connections inverted.

4 years ago
Reply
RE: Which LED-ring is compatible?

If you choose to use an alternate light ring then consider that this is an addressable light and the code running on the Pi-Hat is configured for 12 L...

4 years ago
Forum
Reply
RE: Stepper, LED-Ring und 2. Laser laufen nicht

@archeotro Have you solved this issue yet? if not, you might check continuity from the arduino chip to the ring light, and from the power supply ent...

4 years ago
Reply
RE: Help wanted with 3D design of calibration tool.

Mario, It seems the pivot point for all three positions needs to be the same. What is the optimum distance from the center of the table to the pivot p...

4 years ago
Reply
RE: Scanner scans but no image on the monitor

@emw From the log it looks like the scanner is not connecting to the internet. If the scanner can't connect to the internet then: workaround wo...

4 years ago
Topic
Reply
RE: Trouble Calibrating

Changing the rows and columns did the trick to allow the recognition of the test pattern. I still haven't made a successfull calibration but I'm on th...

4 years ago
Reply
RE: Trouble Calibrating

@mario I used the chessboard-pattern_8x6.pdf, from that I count 9 vertical columns and 7 horizontal rows and they measure 11mm so I thought I had th...

4 years ago
Reply
RE: Trouble Calibrating

@mario Thank you for the quick response. The laser does come on when I powerup the fabscanpi, and "When the settings are avaliable" I can turn it on...

4 years ago
Topic
Replies: 8
Views: 1982