Calibration Fail se...
 
Notifications
Clear all

Calibration Fail server v0.10.0

5 Posts
2 Users
0 Likes
479 Views
mik3d
Posts: 5
Topic starter
(@mik3d)
Active Member
Joined: 2 years ago

I installed the latest version 0.10.0 and when I try to do a calibration I get an error "main calibration not detected". I noticed  awhile back someone posted this same error. Is there a fix for this? 

Reply
4 Replies
mario
Posts: 570
Admin
(@mario)
Honorable Member
Joined: 4 years ago

Hi, 

this is mostly affected by a bad config file. Can you proof your config and compare it to the default one: 

https://github.com/mariolukas/FabScanPi-Server/blob/develop/src/fabscan/config/default.config.json

Especially have a look for missing config parameters in your config. If the error still persists, please share the log file for further investigation. 

- Mario

Reply
mik3d
Posts: 5
Topic starter
(@mik3d)
Active Member
Joined: 2 years ago

I checked  my config next to the default- they match-except for the "origin"
2021-11-21 15:50:36,642 [486:1995844304] DEBUG - fabscan.FSConfig: Loading config file.
2021-11-21 15:50:36,644 [486:1995844304] DEBUG - fabscan.FSConfig: Checking for valid config values.
2021-11-21 15:50:36,646 [486:1995844304] DEBUG - fabscan.scanner.interfaces: Scanner Type is: laserscanner
2021-11-21 15:50:38,465 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705491504
2021-11-21 15:50:38,465 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: Initializing weighted Matrix
2021-11-21 15:50:38,600 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705491504
2021-11-21 15:50:38,602 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Port in Config found using: /dev/ttyAMA0
2021-11-21 15:50:38,606 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Latest available firmware version is: v.20200624
2021-11-21 15:50:40,834 [486:1995844304] INFO - fabscan.lib.util.FSUtil: b'avrdude-original: Using autoreset DTR on GPIO Pin 7'
2021-11-21 15:50:41,358 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Trying to connect Arduino on port: /dev/ttyAMA0
2021-11-21 15:50:44,366 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Installed firmware version: v.20200624
2021-11-21 15:50:44,367 [486:1995844304] INFO - fabscan.scanner.laserscanner.driver.FSSerial: FabScanPi is connected to FabScanPi HAT or compatible on port: /dev/ttyAMA0
2021-11-21 15:50:46,373 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Connection baudrate is: 115200
2021-11-21 15:50:46,374 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Firmware flashing baudrate is: 115200
2021-11-21 15:50:50,388 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Reset FabScanPi HAT...
2021-11-21 15:50:50,597 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Hardware controller initialized...
2021-11-21 15:50:50,599 [486:1995844304] INFO - fabscan.scanner.laserscanner.FSScanActor: Laser Scan Actor initilized.
2021-11-21 15:50:50,603 [486:1995844304] DEBUG - fabscan.server.FSWebServer: /usr/share/fabscanpi/
2021-11-21 15:50:50,604 [486:1580201056] DEBUG - fabscan.server.FSWebServer: Server listening on port 8080
2021-11-21 15:50:50,612 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705491504
2021-11-21 15:50:50,626 [486:1995844304] DEBUG - fabscan.scanner.laserscanner.FSCalibrationActor: Calibration Actor initilaizeed
2021-11-21 15:50:54,082 [486:1995844304] INFO - fabscan.FSScanner: Job scheduler started.
2021-11-21 15:50:54,085 [486:1995844304] INFO - fabscan.FSScanner: Scanner initialized...
2021-11-21 15:50:54,086 [486:1995844304] INFO - fabscan.FSScanner: Number of cpu cores: 4
2021-11-21 15:50:54,088 [486:1995844304] INFO - fabscan.lib.util.FSDiscovery: Trying to register ip 192.168.0.50 to discovery service.
2021-11-21 15:50:55,345 [486:1995844304] INFO - fabscan.lib.util.FSDiscovery: Successfully registered to find.fabscan.org
2021-11-21 15:50:55,506 [486:1995844304] INFO - fabscan.FSScanner: Added discovery scheduling job.
2021-11-21 15:51:15,262 [486:1580201056] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: New client connected
2021-11-21 15:51:15,826 [486:1580201056] DEBUG - fabscan.FSScanner: Upgrade available: False 0.10.0
2021-11-21 15:51:15,832 [486:1590686816] DEBUG - fabscan.scanner.laserscanner.FSScanActor: Checking Hardware connections
2021-11-21 15:51:26,059 [486:1580201056] DEBUG - fabscan.server.services.api.FSStreamHandler: mjpeg stream started.
2021-11-21 15:51:55,526 [486:1493824608] DEBUG - fabscan.FSScanner: CPU Temperature: 48.31 C
2021-11-21 15:52:55,516 [486:1463260256] DEBUG - fabscan.FSScanner: CPU Temperature: 52.62 C
2021-11-21 15:53:55,519 [486:1454867552] DEBUG - fabscan.FSScanner: CPU Temperature: 58.0 C
2021-11-21 15:54:55,537 [486:1442722912] DEBUG - fabscan.FSScanner: CPU Temperature: 59.07 C
2021-11-21 15:54:55,622 [486:1463260256] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 15:55:55,558 [486:1390867552] DEBUG - fabscan.FSScanner: CPU Temperature: 60.15 C
2021-11-21 15:55:55,643 [486:1382474848] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 15:56:55,533 [486:1407652960] DEBUG - fabscan.FSScanner: CPU Temperature: 59.61 C
2021-11-21 15:56:55,563 [486:1493824608] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 15:56:55,564 [486:1493824608] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 15:57:55,540 [486:1399260256] DEBUG - fabscan.FSScanner: CPU Temperature: 61.22 C
2021-11-21 15:57:55,631 [486:1442722912] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 15:57:55,633 [486:1442722912] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 15:58:55,533 [486:1454867552] DEBUG - fabscan.FSScanner: CPU Temperature: 62.3 C
2021-11-21 15:58:55,577 [486:1481589856] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 15:58:55,579 [486:1481589856] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 15:59:55,543 [486:1382474848] DEBUG - fabscan.FSScanner: CPU Temperature: 62.3 C
2021-11-21 15:59:55,596 [486:1428235360] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 15:59:55,597 [486:1428235360] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 16:00:55,512 [486:1493824608] DEBUG - fabscan.FSScanner: CPU Temperature: 62.84 C
2021-11-21 16:00:55,600 [486:1493824608] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 16:00:55,601 [486:1493824608] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 16:01:55,511 [486:1399260256] DEBUG - fabscan.FSScanner: CPU Temperature: 62.84 C
2021-11-21 16:01:58,142 [486:1399260256] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 16:01:58,143 [486:1399260256] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 16:02:55,598 [486:1390867552] DEBUG - fabscan.FSScanner: CPU Temperature: 64.99 C
2021-11-21 16:02:55,604 [486:1454867552] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-21 16:02:55,606 [486:1454867552] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-21 16:03:55,535 [486:1407652960] DEBUG - fabscan.FSScanner: CPU Temperature: 64.99 C
2021-11-21 16:03:55,587 [486:1382474848] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active

Reply
mario
Posts: 570
Admin
(@mario)
Honorable Member
Joined: 4 years ago

This log shows only the startup sequence of your sever. The most interesting part is missing. I need the part when you started the calibration and the error is triggered. 

Reply
mik3d
Posts: 5
Topic starter
(@mik3d)
Active Member
Joined: 2 years ago

Sorry I am new to this. I hope this is what you need. if can tell me where to get it

more /var/log/fabscanpi/fabscanpi.log
2021-11-22 14:54:57,797 [496:1995791056] INFO - fabscan.server.FSScanServer: FabScanPi-Server 0.10.0
2021-11-22 14:54:57,798 [496:1995791056] DEBUG - fabscan.FSConfig: Loading config file.
2021-11-22 14:54:57,800 [496:1995791056] DEBUG - fabscan.FSConfig: Checking for valid config values.
2021-11-22 14:54:57,802 [496:1995791056] DEBUG - fabscan.scanner.interfaces: Scanner Type is: laserscanner
2021-11-22 14:54:59,334 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705429712
2021-11-22 14:54:59,334 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: Initializing weighted Matrix
2021-11-22 14:54:59,455 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705429712
2021-11-22 14:54:59,456 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Port in Config found using: /dev/ttyAMA0
2021-11-22 14:54:59,473 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Latest available firmware version is: v.20200624
2021-11-22 14:55:01,702 [496:1995791056] INFO - fabscan.lib.util.FSUtil: b'avrdude-original: Using autoreset DTR on GPIO Pin 7'
2021-11-22 14:55:02,227 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Trying to connect Arduino on port: /dev/ttyAMA0
2021-11-22 14:55:05,236 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Installed firmware version: v.20200624
2021-11-22 14:55:07,610 [496:1995791056] INFO - fabscan.scanner.laserscanner.driver.FSSerial: FabScanPi is connected to FabScanPi HAT or compatible on port: /dev/ttyAMA0
2021-11-22 14:55:09,617 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Connection baudrate is: 115200
2021-11-22 14:55:09,617 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Firmware flashing baudrate is: 115200
2021-11-22 14:55:13,638 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Reset FabScanPi HAT...
2021-11-22 14:55:13,837 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Hardware controller initialized...
2021-11-22 14:55:13,840 [496:1995791056] INFO - fabscan.scanner.laserscanner.FSScanActor: Laser Scan Actor initilized.
2021-11-22 14:55:13,843 [496:1995791056] DEBUG - fabscan.server.FSWebServer: /usr/share/fabscanpi/
2021-11-22 14:55:13,844 [496:1580201056] DEBUG - fabscan.server.FSWebServer: Server listening on port 8080
2021-11-22 14:55:13,852 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1705429712
2021-11-22 14:55:13,871 [496:1995791056] DEBUG - fabscan.scanner.laserscanner.FSCalibrationActor: Calibration Actor initilaizeed
2021-11-22 14:55:16,058 [496:1995791056] INFO - fabscan.FSScanner: Job scheduler started.
2021-11-22 14:55:16,059 [496:1995791056] INFO - fabscan.FSScanner: Scanner initialized...
2021-11-22 14:55:16,060 [496:1995791056] INFO - fabscan.FSScanner: Number of cpu cores: 4
2021-11-22 14:55:16,062 [496:1995791056] INFO - fabscan.lib.util.FSDiscovery: Trying to register ip 192.168.0.50 to discovery service.
2021-11-22 14:55:17,990 [496:1995791056] INFO - fabscan.lib.util.FSDiscovery: Successfully registered to find.fabscan.org
2021-11-22 14:55:18,135 [496:1995791056] INFO - fabscan.FSScanner: Added discovery scheduling job.
2021-11-22 14:55:30,373 [496:1580201056] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: New client connected
2021-11-22 14:55:31,037 [496:1580201056] DEBUG - fabscan.FSScanner: Upgrade available: False 0.10.0
2021-11-22 14:55:31,040 [496:1590686816] DEBUG - fabscan.scanner.laserscanner.FSScanActor: Checking Hardware connections
2021-11-22 14:55:37,826 [496:1580201056] DEBUG - fabscan.server.services.api.FSStreamHandler: mjpeg stream started.
2021-11-22 14:56:18,139 [496:1461646432] DEBUG - fabscan.FSScanner: CPU Temperature: 53.69 C
2021-11-22 14:56:56,850 [496:1559229536] DEBUG - fabscan.scanner.laserscanner.FSCalibrationActor: Calibration Mode: None
2021-11-22 14:56:58,978 [496:1580201056] DEBUG - fabscan.server.services.api.FSStreamHandler: Stream Handler Finished.
2021-11-22 14:57:18,148 [496:1461646432] DEBUG - fabscan.FSScanner: CPU Temperature: 51.54 C
2021-11-22 14:58:18,173 [496:1430373472] DEBUG - fabscan.FSScanner: CPU Temperature: 53.15 C
2021-11-22 14:59:18,163 [496:1413588064] DEBUG - fabscan.FSScanner: CPU Temperature: 54.77 C
2021-11-22 15:00:18,159 [496:1453253728] DEBUG - fabscan.FSScanner: CPU Temperature: 59.61 C
2021-11-22 15:00:18,210 [496:1484780640] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-22 15:00:18,212 [496:1484780640] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:01:18,172 [496:1559229536] DEBUG - fabscan.FSScanner: CPU Temperature: 58.53 C
2021-11-22 15:01:18,236 [496:1405195360] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:02:18,216 [496:1413588064] DEBUG - fabscan.FSScanner: CPU Temperature: 57.46 C
2021-11-22 15:02:18,256 [496:1453253728] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:03:18,210 [496:1461646432] DEBUG - fabscan.FSScanner: CPU Temperature: 58.53 C
2021-11-22 15:03:18,238 [496:1421980768] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:04:18,174 [496:1484780640] DEBUG - fabscan.FSScanner: CPU Temperature: 59.07 C
2021-11-22 15:04:20,455 [496:1438766176] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:05:18,174 [496:1405195360] DEBUG - fabscan.FSScanner: CPU Temperature: 59.07 C
2021-11-22 15:05:18,234 [496:1430373472] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:06:18,140 [496:1453253728] DEBUG - fabscan.FSScanner: CPU Temperature: 59.61 C
2021-11-22 15:06:18,236 [496:1453253728] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:07:18,162 [496:1461646432] DEBUG - fabscan.FSScanner: CPU Temperature: 60.15 C
2021-11-22 15:07:18,220 [496:1421980768] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-22 15:07:18,562 [496:1421980768] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:08:18,165 [496:1484780640] DEBUG - fabscan.FSScanner: CPU Temperature: 60.15 C
2021-11-22 15:08:22,300 [496:1438766176] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:09:18,162 [496:1405195360] DEBUG - fabscan.FSScanner: CPU Temperature: 60.69 C
2021-11-22 15:09:18,233 [496:1430373472] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-22 15:09:18,234 [496:1430373472] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:10:18,170 [496:1453253728] DEBUG - fabscan.FSScanner: CPU Temperature: 60.69 C
2021-11-22 15:10:18,200 [496:1559229536] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit active
2021-11-22 15:10:18,201 [496:1559229536] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:11:18,204 [496:1421980768] DEBUG - fabscan.FSScanner: CPU Temperature: 62.84 C
2021-11-22 15:11:18,234 [496:1413588064] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:11:27,707 [496:1995791056] DEBUG - fabscan.lib.util.FSUtil: System Exit initiated...
2021-11-22 15:11:33,121 [496:1580201056] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: Client disconnected
2021-11-22 15:11:33,123 [496:1995791056] DEBUG - fabscan.server.FSScanServer: Waiting for Webserver exit...
2021-11-22 15:11:33,128 [496:1569715296] INFO - fabscan.scanner.laserscanner.FSScanActor: Reseting scanner states ...
2021-11-22 15:11:33,303 [496:1569715296] INFO - fabscan.scanner.laserscanner.FSScanActor: Scan stoped
2021-11-22 15:11:34,419 [496:1995791056] DEBUG - fabscan.server.FSScanServer: Waiting for Scanner exit...
2021-11-22 15:12:00,607 [491:1996118848] INFO - fabscan.server.FSScanServer: FabScanPi-Server 0.10.0
2021-11-22 15:12:00,609 [491:1996118848] DEBUG - fabscan.FSConfig: Loading config file.
2021-11-22 15:12:00,611 [491:1996118848] DEBUG - fabscan.FSConfig: Checking for valid config values.
2021-11-22 15:12:00,614 [491:1996118848] DEBUG - fabscan.scanner.interfaces: Scanner Type is: laserscanner
2021-11-22 15:12:02,110 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1706293968
2021-11-22 15:12:02,110 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: Initializing weighted Matrix
2021-11-22 15:12:02,232 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1706293968
2021-11-22 15:12:02,233 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Port in Config found using: /dev/ttyAMA0
2021-11-22 15:12:02,236 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Latest available firmware version is: v.20200624
2021-11-22 15:12:04,401 [491:1996118848] INFO - fabscan.lib.util.FSUtil: b'avrdude-original: Using autoreset DTR on GPIO Pin 7'
2021-11-22 15:12:04,924 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Trying to connect Arduino on port: /dev/ttyAMA0
2021-11-22 15:12:07,933 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Installed firmware version: v.20200624
2021-11-22 15:12:07,934 [491:1996118848] INFO - fabscan.scanner.laserscanner.driver.FSSerial: FabScanPi is connected to FabScanPi HAT or compatible on port: /dev/ttyAMA0
2021-11-22 15:12:21,705 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Connection baudrate is: 115200
2021-11-22 15:12:21,705 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.driver.FSSerial: Firmware flashing baudrate is: 115200
2021-11-22 15:12:25,729 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Reset FabScanPi HAT...
2021-11-22 15:12:25,928 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSHardwareController: Hardware controller initialized...
2021-11-22 15:12:25,930 [491:1996118848] INFO - fabscan.scanner.laserscanner.FSScanActor: Laser Scan Actor initilized.
2021-11-22 15:12:25,933 [491:1996118848] DEBUG - fabscan.server.FSWebServer: /usr/share/fabscanpi/
2021-11-22 15:12:25,935 [491:1577055296] DEBUG - fabscan.server.FSWebServer: Server listening on port 8080
2021-11-22 15:12:25,943 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSImageProcessor: config ID: 1706293968
2021-11-22 15:12:25,957 [491:1996118848] DEBUG - fabscan.scanner.laserscanner.FSCalibrationActor: Calibration Actor initilaizeed
2021-11-22 15:12:26,035 [491:1996118848] INFO - fabscan.FSScanner: Job scheduler started.
2021-11-22 15:12:26,035 [491:1996118848] INFO - fabscan.FSScanner: Scanner initialized...
2021-11-22 15:12:26,036 [491:1996118848] INFO - fabscan.FSScanner: Number of cpu cores: 4
2021-11-22 15:12:26,037 [491:1996118848] INFO - fabscan.lib.util.FSDiscovery: Trying to register ip 192.168.0.50 to discovery service.
2021-11-22 15:12:26,837 [491:1577055296] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: New client connected
2021-11-22 15:12:26,997 [491:1996118848] INFO - fabscan.lib.util.FSDiscovery: Successfully registered to find.fabscan.org
2021-11-22 15:12:27,159 [491:1996118848] INFO - fabscan.FSScanner: Added discovery scheduling job.
2021-11-22 15:12:27,348 [491:1577055296] DEBUG - fabscan.FSScanner: Upgrade available: False 0.10.0
2021-11-22 15:12:27,352 [491:1586979904] DEBUG - fabscan.scanner.laserscanner.FSScanActor: Checking Hardware connections
2021-11-22 15:12:48,543 [491:1577055296] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: Client disconnected
2021-11-22 15:13:07,645 [491:1577055296] DEBUG - fabscan.server.services.websocket.FSWebSocketHandler: New client connected
2021-11-22 15:13:08,129 [491:1577055296] DEBUG - fabscan.FSScanner: Upgrade available: False 0.10.0
2021-11-22 15:13:08,131 [491:1586979904] DEBUG - fabscan.scanner.laserscanner.FSScanActor: Checking Hardware connections
2021-11-22 15:13:11,806 [491:1577055296] DEBUG - fabscan.server.services.api.FSStreamHandler: mjpeg stream started.
2021-11-22 15:13:17,806 [491:1556083776] DEBUG - fabscan.scanner.laserscanner.FSCalibrationActor: Calibration Mode: None
2021-11-22 15:13:19,876 [491:1577055296] DEBUG - fabscan.server.services.api.FSStreamHandler: Stream Handler Finished.
2021-11-22 15:13:27,163 [491:1556083776] DEBUG - fabscan.FSScanner: CPU Temperature: 59.61 C
2021-11-22 15:13:27,234 [491:1493365824] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:14:27,165 [491:1556083776] DEBUG - fabscan.FSScanner: CPU Temperature: 59.07 C
2021-11-22 15:14:27,236 [491:1493365824] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred
2021-11-22 15:15:27,244 [491:1484973120] DEBUG - fabscan.FSScanner: CPU Temperature: 58.53 C
2021-11-22 15:15:27,296 [491:1446106176] WARNING - fabscan.lib.util.FSSystemWatch: Soft temperature limit has occurred

Reply
Share: