Hi Mario,I look forward to the new version with the new frontend; the current version gives me some problems because it always puts the client's graphic GPU at 100% and I think that part of the blocki...

Posted by: amulaya I'm using an arduino uno with cnc shield in place of hat. I had asked about it in the google group. if you have connected arduino <-> raspberry via USB, you can try /dev/tt...

2019-03-19 11:56:26,727 - fabscan.scanner.laserscanner.driver.FSSerial - ERROR - No FabScanPi HAT or compatible device found on port /dev/ttyAMA02019-03-19 11:56:26,727 - fabscan.scanner.laserscanner....

Can you ping fabscanpi ip address from your PC?

Danilo0702, have you tried to look at the file /var/log/fabscanpi/fabscanpi.log?

Hi Amulaya,I also tried starting from a Raspbian-lite image, but I encountered problems in particular with the python-opencv-tbb package that I didn't understand where to find it.Try instead to create...

Danilo0702,at the end of the meshing a small signal appears at the top left that disappears immediately, so it can escape the view. When it is finished you see another tab on the left, to the right of...

Hi Danilo0702,I have a bit of trouble too, so I can't get the scans done correctly, I'm investigating. The laser beam must be perfectly vertical and must pass through the center of the plate. The supe...

Thank you all,I tried to call the minicom program as root, indicating the command line parameters root@fabscanpi:/home/pi#root@fabscanpi:/home/pi# /etc/init.d/fabscanpi-server stopfabscanpi-server st...

Hello,is it possible to talk from Raspberry PI with the FabscanPI HAT card via (internal connected) serial to perform tests? I see in the configuration that Raspberry PI uses the device /dev/ttyAMA0, ...