OK. Thanks a lot. The printing of the 2 parts is in progress. Can you explain to me how you use these 2 parts, and what should be the results obtained in terms of projection of the 2 lasers ?

the distance between each laser and the camera is the only thing I didn't think to check! Yes I have a 3D printer. I am very interested in your stl files and your method to guarantee me a good calibra...

Thanks for this solution. I now have another problem. The 2 captured clouds are very slightly offset from each other. I checked that the 2 lasers are vertical, that they intersect in the center of the...

Hy, some news about my problems ! I made a closed box with a black interior around my cycle. The result is much better (scan_hibou.PNG). But I still have some problems ! How to avoid having the lower ...

@leonnoel :thanks for this first response. Currently, I used the calibration grid proposed on fabscanpi, with the right parameters in the configuration file. I use the cyclop in a closed box with a gr...

Attachment : default.config.txt Attachment : 20220922-140500.png

Hy, after some problem with electronics parts, I try now to scan a part. I use 2 green line lasers, well calibrated (vertical, crossing in the center of the plate). The camera is well centered too. Ca...

Hy, I,ve now install a solution with Arduino UNO and a board ZUN Scan. My WS2812B is now running. It's just a first steep for me, because I can't obtain a good scan. But that will be for a another ti...

First of all, thank you very much for your precious help. it will be very difficult to solder a wire to the pin of the circuit. I just ordered a ZUM scan card to put on an arduino UNO that I have in s...

Is there a solution ?

I've more informations :) . The board use a Mega388p in a TQFP32 package. The 6 pins connector is the ICSP connector, and the MO pin is connected on PB4 / PCINT4 / MSIO. So, to connect the WS2812, I ...

Hy, It seems impossible to put pictures on the forum ( No more attachments are allowed today ??). Also, here is the model of my card (found on a merchant site) : I tried to connect the WS2812B to MO ...

Personne pour m'aider 😭 😭 😭 😭 😭 😭

Hello,I need help !!I am modifying a ciclop to implement the excellent solution offered by FabScan.To date, the solution is almost functional: the camera is OK, the control of the 2 lasers is OK, the ...