Hi Mario,I look forward to the new version with the new frontend; the current version gives me some problems because it always puts the client's graph...

if you have connected arduino <-> raspberry via USB, you can try /dev/ttyACM0 ... i think AMA0 is the built-in ttl serial device (FabscanPI HAT...

2019-03-19 11:56:26,727 - fabscan.scanner.laserscanner.driver.FSSerial - ERROR - No FabScanPi HAT or compatible device found on port /dev/ttyAMA02019-...

Can you ping fabscanpi ip address from your PC?

Danilo0702, have you tried to look at the file /var/log/fabscanpi/fabscanpi.log?

Hi Amulaya,I also tried starting from a Raspbian-lite image, but I encountered problems in particular with the python-opencv-tbb package that I didn't...

Danilo0702,at the end of the meshing a small signal appears at the top left that disappears immediately, so it can escape the view. When it is finishe...

Hi Danilo0702,I have a bit of trouble too, so I can't get the scans done correctly, I'm investigating. The laser beam must be perfectly vertical and m...

Thank you all,I tried to call the minicom program as root, indicating the command line parameters root@fabscanpi:/home/pi#root@fabscanpi:/home/pi# /et...