Liked Forum Posts
RE: FabScanPi Server is currently not running For me, flashing the bootloader was the solution. After that, the connection to the fabscan server finally works. You can find an instruction here: There also is a post regarding the bootloader fla... |
In forum [Software] FabScanPi Server |
3 years ago |
RE: FabScanPi Server is currently not running Since you have mentioned you are using an uno arduion board are you using the fabscanpi hat provided as part of the kit aor are you trying to use an arduino uno R3? The arduino R3 will require a hat ... |
In forum [Software] FabScanPi Server |
3 years ago |
RE: Impressionen Vater und Sohn haben das gleich Modell. Einen in Größe "M" habe ich im Januar gemacht und er war so begeistert von seinem persönlichen mit Handabdruck, daß er noch einen in Größe "XL" haben wollte. De... |
In forum [International] German |
4 years ago |
RE: Power-LED and shutdown-button @marioThat's exactly what I added on github: |
In forum [Hardware] Mechanics |
4 years ago |
1 second ago | ||
RE: Problem importing into meshlab and meshmagic I am attaching a screen shot of part of a .ply file displayed with notepad++. Please look at yours and see if they are similar. In the first 15 lines which are the header lines before the data it wi... |
In forum [Software] Third party |
4 years ago |
RE: Original Ciclop Question Seems to be working for me now with the HE3D Cyclop, Pi4, and a pi-cam! |
In forum [Software/Hardware] Development |
4 years ago |
RE: New Release v.0.9.2 Update - I was able to complete a scan at 100% resolution, but when I tried to download the file from the UI I received a 404 error. Attachment : Capture 1.JPG But, I was able to transfer the f... |
In forum [General] Announcements |
4 years ago |
RE: New Release v.0.9.2 All working great on my system. Thanks for the work Mario! |
In forum [General] Announcements |
4 years ago |
RE: Problem mit der v0.9.1-0.9.3-0.9.0 testrelease Posted by: @mario Noch mal kurz der Hinweis: Bei den Testing Releases kann es immer mal wieder vorkommen dass eine aktuellere Version nicht funktioniert. Deshalb sind sofortige Upgrades innerhalb des... |
In forum [International] German |
4 years ago |
RE: Teller dreht nicht mehr. Aber 322 ist das höher als 306 ?. Es war davor auch die 306 drauf dann hat er beim Start automatisch auf 322 geflashed. ich hab jetzt alles wie du gesagt hast neu aufgesetzt mit der Stable und es geh... |
In forum [International] German |
4 years ago |
RE: Laser mount for NEMA 17 stepper motor And a Link it is to big i have this on 2 Stepper |
In forum [Hardware] Mechanics |
4 years ago |
RE: Laser mount for NEMA 17 stepper motor @mario Here ist the Link again, I hope it will work now. Best regards, Dan |
In forum [Hardware] Mechanics |
4 years ago |
Laser mount for NEMA 17 stepper motor Hello everybody, yesterday I was waiting for the flange that fixes the turntable to the motor, but the package is delayed. So I decided to use the time for something else and print laser-mounts for ... |
In forum [Hardware] Mechanics |
4 years ago |
RE: Impressionen Heute mal ein Teil mit dem Testrelease 0.9.0 gescant, im CAD kurz geglättet, dann ab zum CAM und wenig später an der CNC mit einem 0,3mm Fräser bearbeitet. Als Holz hab ich Bongosi gewählt, sogenannte... |
In forum [International] German |
4 years ago |
RE: Help wanted with new Raspberry Pi High Quality Camera Hi Mario, what do you think of making a kind of adapter that you screw over the "old" mounting holes of the camera to the LED ring and screw the "nex" camera onto it? I could possibliy design a stl fi... |
In forum [Hardware] Mechanics |
4 years ago |
RE: Thingiverse Sorry for English, I have been planning on doing this, great Idea and Thanks for sharing!! |
In forum [International] German |
4 years ago |
RE: Thingiverse Hier der Link zum Lasertower: Unter diesem Link habe ich soeben eine Gruppe erstellt, in der man hoffentlich mehr "Updates" oder anderweitige Designs findet. Falls jemand Vorschläge hat oder mehr ... |
In forum [International] German |
4 years ago |
Thingiverse Hi Leute, ich wollte fragen ob es hier von Interesse wäre Modelle von "Veränderungen" des Fabscans bei Thingiverse ein zustellen und diese hier einer Rubrik zu verlinken? Ich habe zum Beispiel die Las... |
In forum [International] German |
4 years ago |
RE: Start Probleme und Problem mit dem Motortreiber (LV8729) Ja das ist doch schonmal was.... freut mich total, dass man eine Lösung gefunden hat ? |
In forum [International] German |
4 years ago |
RE: Probleme mit dem Start Posted by: @mario Demnach könntest du mal versuchen das ganze wie auf meiner Fotomontage zu bestücken: Hab ihn mal nach der Fotomontage bestückt und es lässt sich nun wesentlich feiner die Spann... |
In forum [International] German |
4 years ago |
RE: First Scanning Results with Dual Laser in Red, with "Raft", but "Raft" is in real not there I found, now with picture: Attachment : Raft.png |
In forum [Software] FabScanPi Server |
5 years ago |
RE: Bootloader Flashing Tool. The following might help to clarify a few things: Marios photos above serve to illustrate the connections to the PI-HAT for FLASHING the bootloader. The most problematic connection is to the RESET on ... |
In forum [Hardware] Electronics |
5 years ago |
RE: Which LED-ring is compatible? If you choose to use an alternate light ring then consider that this is an addressable light and the code running on the Pi-Hat is configured for 12 LEDs. If you have more than 12 LED then only the fi... |
In forum Hardware |
5 years ago |
RE: Mehrere Scans von einem Objekt Super, vielen vielen lieben Dank für die ausführliche Anleitung. So kann ich das bestimmt machen... jetzt muss ich erstmal auf ein anderes Kabel warten... in meinem Set war für das Ringlicht leider ei... |
In forum [International] German |
5 years ago |
RE: FabScanPI Server läuft nicht.... jo habs etz hinbekommen... keine ahnung wie .... erst ging die kamera nur mit der version 0.8.0 und mit der 0.8.2 nicht.... hab mal mein java auf dem pc geupdatet... und das image neu aufgespielt usw.... |
In forum [International] German |
5 years ago |
RE: Trouble Calibrating Changing the rows and columns did the trick to allow the recognition of the test pattern. I still haven't made a successfull calibration but I'm on the right track. I am getting the following error an... |
In forum [Software] FabScanPi Server |
5 years ago |
RE: Help wanted with 3D design of calibration tool. I quickly sketched something out. I hope I understand the issue correctly. Attachment : Position 5.jpg\ Attachment : Position 4.jpg\ Attachment : Position 3.jpg\ Attachment : ... |
In forum [Hardware] Mechanics |
5 years ago |
RE: Help wanted with 3D design of calibration tool. I use a similar calibration mount like @emw suggested for calibrating ciclop/fabscan scanners. Attachment : mount.png For general camera calibration I wrote an article about it .In the case of ... |
In forum [Hardware] Mechanics |
5 years ago |
Pin outs for fan @Mario Which pin out need to be used for getting a 12V fan options working on the FabScan board. I have a working model version that I have printed and will gladly put up a video on it's assembly and ... |
In forum [Hardware] Electronics |
5 years ago |
RE: Calibration improvements and scanning speedup. Yes, let's try to coordinate. I will put together some information how to speedup the ciclop/fabscan and post it here. This should be a good starting point for further improvements. |
In forum [Software/Hardware] Development |
5 years ago |
RE: Calibration improvements and scanning speedup. The setup is using the FabScan shield to support the LEDs and the new TMC stepper controller. It also uses a striped down version of the turn table removing the heavy weight from the oversized origina... |
In forum [Software/Hardware] Development |
5 years ago |
FabScanPi HAT and A4988 Driver Hi, got the FabScanPi Hat and the wooden frame about a year ago. The basic setup was easy enough but the "advertised" use of the old a4988 drivers posed a bigger set of problems. [i have a lot of th... |
In forum [Hardware] Electronics |
5 years ago |
RE: My FabScanPi with some improvements Attachment : CIMG0706.JPG Attachment : CIMG0704.JPG Attachment : CIMG0703.JPG |
In forum [Hardware] Electronics |
5 years ago |
RE: My FabScanPi with some improvements My calibration sheet fabricated from PCB. The camera adjustment by means of M3x16 bolts and nuts. My camera was way off. The support for the sides to fix the gap between the lid and the sides made fro... |
In forum [Hardware] Electronics |
5 years ago |
RE: HAT not working - same as everyone else @mario Did full re-install and everything is working so far. Don't know what was the issue and will try to find out for you. But now it is connecting and running. |
In forum [Hardware] Electronics |
5 years ago |
RE: HAT not working - same as everyone else @mario Well Mario, you are a miracle worker. That worked! The server and browser are up an running, time to work on calibration and a scan. Many Thanks. I posted the result of the above commands and... |
In forum [Hardware] Electronics |
5 years ago |
RE: Datum für neues Release mir ist heute der erste wirklich richtige zufriedenstellende Scan mit allen Details gelungen.Ich habe einen Pistolgriff gescant, da waren sogar die einzelnen Pyramiden der Fischhaut zu sehen. So über... |
In forum [International] German |
5 years ago |
RE: Software 0.8.0 Problem Posted by: @f-haupt Ich kopiere mal aus einem anderen Thema: Es ist wichtig das in deiner Konfigurationsdatei im Laser Teil das folgende drin steht: "laser": { "interleaved": "False", "numbers... |
In forum [International] German |
5 years ago |
RE: Software 0.8.0 Problem Ich kopiere mal aus einem anderen Thema: Es ist wichtig das in deiner Konfigurationsdatei im Laser Teil das folgende drin steht: "laser": { "interleaved": "False", "numbers": 2, "color": "R ... |
In forum [International] German |
5 years ago |
schwenkbarer "Drehteller" Wie findet ihr die Idee eines schwenkbaren "Drehtellers"? Würde euch gerne Bilder meiner Idee zeigen, leider finde ich den Button zum Bilder einfügen nicht :( Gruß Stefan |
In forum [International] German |
5 years ago |
RE: Version 0.8 - fabscan.FSScanner - ERROR - too many values to unpack Problem gelöst. Ich hab in der config die IP meines DNS bei "online_looup_ip" eingetragen und es geht |
In forum [International] German |
5 years ago |
RE: Mirrored Scan I have been working with the scanner every day since February --- the scan is flawless, only the mesh processing is faulty.I take the image data and process it externally in another software. The resu... |
In forum [Software] FabScanPi Server |
5 years ago |
Turntable and object position I have been struggling with 'bottomless' scanresults ever since I made my first scan. Re-adjusted and checked things quite a few times, even 3d-printed a stand that nicely fits the fabscan-supplied ba... |
In forum [Hardware] Mechanics |
5 years ago |
last picture ...and with HDD. < span style="color: #666;"> Attachment : 4_Bottom__HDD.jpg |
In forum [Hardware] Electronics |
6 years ago |
RE: RPi-Fabscan-Hat < span style="color: #666;"> Attachment : Front.jpg < span style="color: #666;"> Attachment : Bottom.jpg |
In forum [Hardware] Electronics |
6 years ago |
RE: RPi-Fabscan-Hat So der Umbau ist jetzt erstmal soweit abgeschlossen und funktioniert garnicht mal schlecht. Ich hab allerdings festgestellt, das doch noch ein Pin mehr benutzt wird.... "avrdude-original: Using autore... |
In forum [Hardware] Electronics |
6 years ago |
RE: Increase Speed FabScanPi Hello Mario and Rene, As my name suggests, I work in the field of additive manufacturing with a focus on post-processing. Here I need relatively fast results of a 3D scan with low resolution because t... |
In forum [Software] FabScanPi Server |
6 years ago |
RE: How to setup WiFi. last release - Lan-network via ssh --> login -- sudo raspi-config --> Nr. 2 < span style="color: #666;"> Attachment : IMG_5495.PNG |
In forum Software |
6 years ago |
RE: Communicate with FabscanPI HAT I installed screen on my Pi and was able to test all firmware commands that I was interested in, e.g. turn on/off the laser. |
In forum [Software] FabScanPi Server |
6 years ago |
RE: Communicate with FabscanPI HAT Hello, I have tested it too with minicom 2.7 and for me it worked with fabscanpi-server 0.7.0 started and stopped and Firmware v.20190211. I can turntable start/stop and both lasers on/off. - Jens |
In forum [Software] FabScanPi Server |
6 years ago |
Answer to: How can I use the latest testing version of the software? es hat sich ein kleiner Fehler eingeschlichen. Die Zeile, welche man ändern muss, heisst deb stable main diese ändert man in deb testing main ((und das abspeichern nicht vergessen )) |
In forum Software |
4 years ago |
Answer to: What is the username and password for ssh? The username / password is the same as in the default Raspian configuration: Username: piPassword: raspberry |
In forum Software |
4 years ago |
Answer to: How can i setup the WiFi connection? Create a file in the /boot folder of your SD-Card. You can use a card reader or a wired connection to your pi to do that. The file must be called wpa_supplicant.conf and contain the following lines:... |
In forum Software |
4 years ago |
How can I use the latest testing version of the software? Yes i know it might bring some problems but I am a brave user and want to help evaluating the upcoming stable version of the FabScan software. How can i install the current testing branch of the softw... |
In forum Software |
5 years ago |
Answer to: How can I use the latest (probably unstable) software? The following instruction assumes that you start by using a fresh installation from the latest image. You need to edit the repository settings in the sources list in the console by typing: sudo nano /... |
In forum Software |
4 years ago |
RE: Which LED-ring is compatible? If you choose to use an alternate light ring then consider that this is an addressable light and the code running on the Pi-Hat is configured for 12 LEDs. If you have more than 12 LED then only the fi... |
In forum Hardware |
5 years ago |
Which LED-ring is compatible? Which type of LED Ring is supported by the FabScan Software yet? |
In forum Hardware |
5 years ago |
Answer to: Does the Software support Laser movement by Stepper or Servo.? No there is no implementation for the servo/stepper laser movement until now. It was on the todo years ago and never implemented. But the case is ready to add a stepper or servo for laser movement. |
In forum Hardware |
4 years ago |
Answer to: Which LED-ring is compatible? Any ring using WS2812B LEDs (or compatible) will do. To avoid problems with the calibration we suggest using the FabScanPi LED-board. |
In forum Hardware |
4 years ago |
Does the Software support Laser movement by stepper/servo? Does the FabScan software provide a feature to use laser movement with a servo or stepper motor, cause the case provides some options to mount a servo or stepper. |
In forum Hardware |
5 years ago |